Tag Archives: Water Plant Manufacturer in Kolkata

How Advantageous Is A Water Manufacturing Plant In Kolkata?

It is essential to monitor water quality by an expert water plant manufacturer in Kolkata. The company also makes the water suitable for home use. Here is a summary.

The water drawn from spring is mineral water. Among the minerals it contains are salts and composites of sulphur. Depending on whether or not there are additional gases, mineral water can either be “calm” or “sparkling.” Because it is an international issue and an important topic, the discussion on water treatment included some influential people. Water plant manufacturer in Kolkata is using sustainable ways as the solution. To move beyond compliance and start the process of raising the water standard, they are employing some cunning strategies.

Continue reading

What You Need To Know About Water Treatment Plants?

Experienced water plant manufacturer in Kolkata keeps in check the quality of water and makes it fit for consumption & domestic purposes. Here is an overview. 

Water is one of the reasons behind life on Earth. The importance of water is vast, from maintaining life to finding use in numerous daily activities. Water softening plants have grown in popularity. It ensures that water quality is consistent and suitable for domestic tasks. Mineral water plant in Kolkata has become increasingly crucial for society as it finds use for personal or commercial purposes.

Why Is Naturally Occurring Water Unfit For Use?

When there is an excessive amount of calcium and magnesium dissolved in water, it is known as hard water. A water softener is a device that aids in the softening of water by eliminating metals via ion exchange and precipitation processes. Although hard water is safe to drink, it can cause the following problems:

  • Pipes become clogged, resulting in reduced water flow.
  • Equipment damage in the home
  • White film deposits on glass surfaces
  • The need for more energy to heat hard water has increased.

The Process Of Treating Water

The water softening plant in Kolkata has the specific task to treat water for a variety of applications. A mineral tank and a brine solution tank make up the plants. The water that needs treatment goes into a mineral tank that contains negatively charged ions. When attracted by anions from the mineral tanks, the resin surface becomes coated with metal ions. Finally, the draining of the solution and thorough washing continues. It is where the Sodium ions flush out the weaker Magnesium and Calcium ions from the resin. 

There are a variety of industries that uses water softeners for the smooth running of their business:

  1. Boiler Feed
  2. Hospitals, hotels, food processing industries
  3. Laundries and textile processing
  4. Pharmaceutical industries
  5. Chemical and beverage industries
  6. Air conditioning plants

Conclusion

Known as the best water treatment plant manufacturer in Kolkata, Priti International is a name to reckon with. The company designs and manufactures effective and efficient water softeners. Their only goal is to continue making at-par machinery that is productive, affordable and versatile. 

What Is The Work Of A Water Softener Regeneration? Various Cycles

The water manufacturers in Kolkata are of the opinion that the regeneration cycle washes off the hardness of the minerals in the water and also drains them out of the system. Resin beads are very durable and soften the water effectively. 

Different Types Of Regeneration Cycles:

  1. Co-Current Regeneration Cycle:
  • The co-current regeneration cycle has a brine solution that enters the mineral tank in a similar direction as the service flow. You can find a lot of mineral water plants in Kolkata that flow down the depth of the resin beads bed as well as takes charge of an ion exchange procedure.
  • As the brine flows over the resin beads, the salts let the beads release the calcium and magnesium ions in place of the sodium ions. Co-current regeneration utilizes more salt and water for completing the procedure than counter-current. 
  1. Counter-Current Regeneration Cycle:
  • In a regeneration cycle requiring counter-current, water enters the tank from the bottom of the mineral tank from where the water usually comes out. The countercurrent process runs the brine above the resin bed, commencing at the bottom where the resin beads usually deplete at the last. 
  • A water softener with counter-current cycling uses 75% less salt as well as 65% less water than the previous co-current one. It is also responsible for an efficient distribution of recharging sodium ions. Hence, these are also known as highly efficient water softening plants in Kolkata. 

Conclusion:
To get your hands on efficient water softeners, get in touch with the best water plant manufacturer in Kolkata, Priti International. They know what your ultimate water plant needs are and thus, deliver service accordingly. Moreover, you don’t have to worry about the prices. So, head over to them today.

Good Business Possibilities Of Packaged Water Manufacturing

blog02

Mineral water was the terminology used for spring water which was rich in minerals. There was a time people would make a trip to natural springs and use that water. Water from springs has therapeutic value. People drank and took a bath with it. Gradually business ideas led to the sale of this water in packages. Today mineral water is made in plants. There is now excellent Water Plant Manufacturer in Kolkata which produces mineral water and also supplies water manufacturing plants to other packaged drinking companies. Here’s more on bottled water business:

Packaged Water Business –

  • In packaged water, you first treat the water and then add the essential minerals. You then deliver the final product to the customers in packaged bottles.
  • Mineral water is in great demand always. Today almost everyone is health-conscious and aware of what they are eating. All are very conscious about the drinking water as well. The packaged water thus gives them the guarantee of good, healthy and contamination-proof water. Alongside, added minerals provide them with required benefits. Hence the demand and need are always steady.
  • The major expense is just setting up the plant. Other than this, the cost of raw materials is much less. This indeed is a value for money because you get easy profit for this business.
  • Even though there is an expiry period for every bottled and packaged item, water is not perishable easily. Hence there are minimal chances of a loss. This also means better storage capacity for water.
  •  However, it is essential to get a good turnkey supplier for packaged drinking water manufacturing plant. This will be half the work done. But how do you identify a good supplier:
  • The adequate experience about water treatment plants, preferably a turnkey project consultant.
  • Certifications which prove their credibility as a supplier.
  • Past project experiences of collaboration with reputable clients
  • Well-known brand association
  • Different  options available as per the financial capability of the client
  • Experts in the area to provide technical training to workers
  • Round-the-clock technical support as per need of the customer assurance of a long term maintenance

Priti International is one such – Water Manufacturer in Kolkata which can give you turnkey solutions so that you have a good business and make a profit of your business.

 

 

Different types of Water Softeners used in water treatment.

Different types of water softeners are used to treat the hard water. Here are some of the water softeners used in the Water Plant Manufacturer in Kolkata.

Water Plant Manufacturer in Kolkata

Water softeners are used for reducing or completely removing the calcium and magnesium content from the water collected. There are different types of water softeners that also help in reducing or cutting down the manganese and iron content from the water. The presence of these minerals makes water hard. People generally do not drink hard water. Though it is already proved that hard water is not so harmful and people think but it can be the reason for some of the water-borne diseases. This is the
reason why water softening is important. The best Water Treatment Plant Manufacturer in Kolkata uses the most advanced machinery and the best water softeners to treat water and make it fit for human consumption.

Hard water contains different metal ions, which react with soaps and prevent the water from making much lather. Hard water containing metal ions leaves noticeable rings in the bathtubs and on the water surfaces. The deposits of magnesium and calcium present in the hard water accumulate on metal objects like pipes, shower heads, sink faucets, pans, and pots.

Water softeners are of three types, potassium, sodium, and hydrogen. These water softeners comprise of a resin bed via which the water flows. Resin is found to have a negative charge and because of this, it clings to the positively charged metal ions present in the water. Potassium, sodium, and hydrogen are specifically used in the resin that exchanges with the divalent components like magnesium and calcium ions in the water. This means that when magnesium and calcium are eradicated from the hard water, they get replaced by sodium, potassium, and hydrogen.

These water softening agents get used up in the long run as they are found to release sodium, potassium, and hydrogen molecules in the water when it flows. The resin can be stored by letting some amount of brine to pass through it. Different types of brine can be used in this case like sodium chloride, hydrochloric acid, potassium chloride, etc. After the brine has been used, it may result in the discharge of large quantities of brines to the environment that may lead to certain problems. This is the reason why a water treatment plant needs to be set up in as many regions as possible. A resin water softener
has a side effect and that is it allows water to get loaded with sodium when the water is too hard. The best consultant of Water Plant Manufacturer in Kolkata that is Priti International, always suggests to use the best water softeners for treating the hard water and make it suitable for human uses.

Advantages and Basic Requirements of a Water Manufacturing Plant

These days there are good Water Plant Manufacturer in Kolkata supplying packaged water to all. Here are the advantages and requirements of setting up a plant.

soda water planti

The bottled water that we use today is nothing but mineral water. Though the mineral water originally used was actually from the naturally available mineral springs. Because of its therapeutic properties people would then go to areas where there were natural springs and bring water from those areas. The water was used not just for drinking but also for bathing. The enterprising few took advantage of this and began to bring this in bottled form and then sell it. Nowadays the mineral water that we refer to is actually sparkling water which is carbonated or it may be still water if no added gases are there. These water are now manufactured by Water Plant Manufacturer in Kolkata from where this water is supplied to different parts of the state and the nation.

The packaged drinking companies carry out the process of bottling of water whereby the treatment of water, addition of essential minerals and packaging for reaching out to different parts of the country. Manufacturing of packaged drinking water is very profitable because:

  •  Being health conscious today, people place a lot of importance on health and hygiene factor and are very conscious about drinking water. They avoid drinking water from unknown sources. The bottled water is safe and tamper proof and ensures about the quality of water that is being drunk. Moreover these are treated water where minerals are added , which is essential for the body. All these factors make the water suitable for drinking purposes and hence there is always a heavy demand for the same.
  •  It is a very profitable venture because the primary setting up of the plant is the major expensive part but once that is done, the other costs inclusive of the cost of raw materials is much less.
  •  Water is not a perishable item and though there is always a shelf life for a packaged item, the longevity of water is much more, The chances of loss is minimum.
  • It is much easier to store water than other food or perishable items.

One can opt for a soda water plant alongside for maximizing profit. The primary requirement for having a good packaged drinking water plant is to have a good manufacturer with the following qualities-

  • Experience of water treatment in application. In this regards, turnkey project consultants are always an added advantage.
  •  Credibility of the manufacturer including of required certifications
  • Reputable client list with whom there would have been a previous working experience
  • Working partnership with well known brands
  • Availability of different models as per the financial capacity of the client
  • Availability of experts for round the clock support and for training purposes
  • Hassle free maintenance support system.

These are the basic requirements for setting up a water manufacturing plant which is indeed a lucrative business today.

How does the water softening plant work effectively with the help of turnkey solutions?

Water Softening Plant in kolkata , Water Plant Manufacturer in Kolkata

When it comes to installing on-site water softening plant in Kolkata, one can either control all processes in a piecemeal manner or opt for the most constructive turnkey package solutions. There are several benefits for using this feature-

1. Customized Built-in technologies : This system enables one to keep the keep their consumers settled and encourage them to gain the most in this competitive market. The choice to invest in the water treatment and softening plants is determined by several factors which is why one should always try to tailor the best custom made plannings and designs.

This customized configuration of wastewater treatment sections works for specially made processors. They have received a huge ovation and praise for their services and high-grade designs. The dedicated team of technicians and project control members provide the most convenient environment for enhanced performance.

The package comprise of these actions –

• Laboratory and pilot testing
• Complete designing and process studying
• Acquisition
• Construction and installation
• Commissioning and testing
• Training, aftercare services etc

Using this project solution has several advantages –

• Strategic solutions
• Strong responsibility and single time contact
• Flexibility in designing and building quality of all grades
• Cost efficient pricing
• Tight plannings and deadlines
• Better technological alliance

2. Reducing wastewater disposal management : The on-site water plant manufacturer in Kolkata reduces the discharge of untreated waste to a regional city processing plant. One should be sure to review the actions and purposes which will, in turn, help in balancing the initial expenses of establishing a waste water treatment method

3. Keeping pace with increases : This allows the factory to manage the supplementary wastewater discharge with expertise, supporting the businesses to make way for more potential. Whether it is about obtaining assets or producing a new line of products, it allows the systems to adhere to effluent conditions like improving the services etc.

4. Reducing the hauling charges : In some cases, the plant itself is no longer equipped to handle the stock or measure the wastewater from automated processors. Sometimes the plants are situated in isolated sectors with no municipal processing plant prospects. By selecting a customized on-site processing solution, the plant can save a lot of expenses.

5. Comply with environmental regulations : This is arguably one of the greatest motivators to advance in on-site wastewater plants. Following the effective release, laws are very significant for maintaining environmental stability. The future of water manufacturing depends only on that, which justifies why stronger sentences are being forced whenever there is inappropriate disposal. By adhering to this turnkey package solution, plants will follow strict commandments while expecting more behavioral maintenance.

Every industrial unit can profit from spending on advanced technology and orderliness. The water treatment plant should also opt for the best plannings and take constructive advice from specialists like ‘Priti International” which cater their best and customized turnkey solutions according to the requirements of a plant.